Must Plungers

Bob Thomas Uses the Must PLungerThrow away the "old oak stick" and purchase a grape friendly, sanitary, stainless steel Must Plunger. The Must Plunger is an essential tool that increases the color and phenolic extraction of the grapes during the fermentation phase in red wine making. With its use, you can achieve a cap management techniques that greatly enrich the quality in your wines in the areas of aromatics, varietal proninciation and deeper colors you have not experienced before.

 You may also click on each of the below images for a detailed view of our fine product. The stainless steel Must Plunger has a powerful ten inch disc and is available in either a 48” or 60” handle. Custom length handles can be purchased upon request and at an additional cost. The Must Plunger is available at many fine winemaking supply stores.

There are three (3) Must Plunger models. The Pony Model that has an eight (8) inch disc with a 36” (1” OD) handle. The Professional Model has a ten (10”) inch disc with a 48" (1" OD) handle. The Must Plunger mainly used by wineries, “The Winery Model” has a ten (10") inch disk with a 60" (1" OD) handle. All models are constructed of rigid stainless steel. Because there are only 3 parts to the Must Plunger, [the handle; the disc, and a screw], and the fact that they are made with high quality materials, there isn't anything that can break when used properly. With a minimum amount of maintenance, (clean well after each use), it will last a long time...” "It’s built to last forever".

3 Item(s)

per page

Set Descending Direction
  1. Must Plunger - Stainless Steel - 36 in. Handle

    Must Plunger - Stainless Steel - 36 in. Handle

    $59.00

    Stainless steel Must Plunger with an 8 inch diameter disc and 36 inch (1”OD) handle.

    Must Plungers Are Available In Custom Sizes Upon Request.  Click Here to Contact Us.

    Learn More
  2. Must Plunger - Stainless Steel - 48 in. Handle

    Must Plunger - Stainless Steel - 48 in. Handle

    $79.00

    Stainless steel Must Plunger with a 10 inch diameter disc and 48 inch (1”OD) handle.

    Must Plungers Are Available In Custom Sizes Upon Request.  Click Here to Contact Us.

    Learn More
  3. Must Plunger - Stainless Steel - 60 in. Handle

    Must Plunger - Stainless Steel - 60 in. Handle

    $89.00

    Stainless steel Must Plunger with a 10 inch diameter disc and 60 inch (1”OD) handle.

    Must Plungers Are Available In Custom Sizes Upon Request.  Click Here to Contact Us.

    Learn More

3 Item(s)

per page

Set Descending Direction